Showroom Location:
713 Center Drive
San Marcos, CA 92069
Phone: 760-739-8222
CANCELLED ZOOM Scan N Cut #3 - Cutting Fabric
Are you a Brother ScanNCut machine owner, but don't feel that you are getting the most out of your machine as you lack the confidence or the knowledge to use it? Then this class is for you!
We are going to discover four different methods on cutting the fabric with your Scan-N-Cut machine.
Depending on your project you might need to use a certain way of cutting, so during this class you will be shown these methods and I hope you will leave the class armed/equipped/informed!
It is a good class to start developing your knowledge about “Scan-N-Cut Fabric” relationship and so you will feel more comfortable during the next classes.
You will need the following supplies:
- Scan N Cut machine
- 2 Standard Cutting Mat AND High Tack Fabric Support Sheet
OR 1 Standard Mat and 1 New Fabric Mat
- HeatAndBond or any other Heat Fusible applique Backing
- Scraps of fabric at least 5" X 5" preferably cotton (4 to 6 pieces)
- Machine accessories such as Spatula and Brier, etc.
- Terial Magic (Stabilizing fabric spray - not starch)to saturate one scrap piece of fabric and let it dry & Ironed before class
If you have any questions, please contact Marina
We are going to discover four different methods on cutting the fabric with your Scan-N-Cut machine.
Depending on your project you might need to use a certain way of cutting, so during this class you will be shown these methods and I hope you will leave the class armed/equipped/informed!
It is a good class to start developing your knowledge about “Scan-N-Cut Fabric” relationship and so you will feel more comfortable during the next classes.
You will need the following supplies:
- Scan N Cut machine
- 2 Standard Cutting Mat AND High Tack Fabric Support Sheet
OR 1 Standard Mat and 1 New Fabric Mat
- HeatAndBond or any other Heat Fusible applique Backing
- Scraps of fabric at least 5" X 5" preferably cotton (4 to 6 pieces)
- Machine accessories such as Spatula and Brier, etc.
- Terial Magic (Stabilizing fabric spray - not starch)to saturate one scrap piece of fabric and let it dry & Ironed before class
If you have any questions, please contact Marina
Skill Level:
intermediate
Skill Details:
All ScanNCut models are welcome but you must know the basics of using your machine.
Need to know where the basic operation buttons are located, how to load and unload the mat.
Instructor Name:
Marina Bondarenko
Instructor Bio:
Marina Bondarenko (marinafashion777@gmail.com)
Follow Miss Marina on facebook: www.facebook.com/sewingwithmarina
Follow Miss Marina on facebook: www.facebook.com/sewingwithmarina
CANCELLED ZOOM Scan N Cut #3 - Cutting Fabric
Cost:
$ 25.00